Product Overview Product Overview Product Overview:

This product is a uniform mixture based on fluorosilicone rubber, blended with various fillers and additives.

Superior high tensile strength and tear resistance.

Excellent oil, solvent, and high/low temperature resistance.

Technical Indicators Technical Indicators Technical Indicators:

Item

Eye

Metric

Grade

Appearance

Test Method

Milky translucent

Density / g/cm³

ASTM D792

1.45

1.46

Hardness / Shore A

ASTM D2240

63

69

Tensile Strength /MPa

ASTM D412

12.1

12.3

Elongation at break /%

ASTM D412

360

340

Tear Strength / kN/m

ASTM D624-B

34

32

Permanent Compression Set (177°C × 2 2h)

ASTM D395

10

9

* Heat Resistance

225°C × 72h

Hardness Change

(Shore A)

+2

+2

Tensile Strength

Change Rate, %

-18

-17

elongation at break

Change rate, %

-14

-16

Fuel C

Volume Change Rate /%

23°C/72h

ASTM D471

21

20

Curing Conditions

Add 0.7 portions of DCP. Cure at 170°C for 15 min (Stage 1), then post-cure at 200°C for 4 h (Stage 2).

*Data in the table represents typical product performance and is not a manufacturing standard.

*Heat resistance requires the addition of heat-stabilizing additives.

Processing suggestions:

It is recommended to use 2,5-dimethyl-2,5-di(t-butylperoxy)hexane (2, 5) at a dosage of 0.6–1 parts.

Select the optimal curing temperature and time based on product dimensions and vulcanization method.

Dongguan Ningdao Adhesive Co., Ltd.

Product Packaging:

This product is non-hazardous. Packaged in cartons with plastic bags inside; each bag weighs 10 kg, and each carton contains two bags.

Shelf Life:

This product exhibits cold flow. Avoid damaging the packaging during transport and use.

Store in a cool, dry place. Shelf life: 12 months.